Tesy 
Customer feedback
* Required fields
- High-quality enamel coating ensuring long operating life
- Highly efficient PU insulation
- Efficient anode protection
- Service flange for easy inspection of the appliance
- Option for installation of an electric heating element
- Option for installation of a thermal regulator
- Option for installation of a thermal sensor
| Energy class | B |
| Diameter | 600 mm |
| Maximum operational temperature | 95 °C |
| Capacity | 200 L |
| Continuous flow rate of DHW at ΔT 35°C (S1) *60-80/70-90°C | 558/648 L/h |
| Exchanged power in continuous mode (max coil output) S2 *60-80 / 70-90°C | 13/20 kW |
| Heat losses ∆T 45K | 1.4 kWh/24h |
| Rated pressure of the water tank | 8 bar |
| Thermo pocket | 2 pieces |
| Heat exchanger capacity S2 | 3.3 L |
| Continuous flow rate of DHW at ∆T 35°C (S2) *60-80 / 70-90°C | 318/468 L/h |
| NL factor S1 | 4.1 |
| NL factor S2 | 1 |
| Minimum time of heating S2 *80°C-**15/60°C | 39 |
| Net weight | 70 kg |
| Exchanged power in continuous mode (max coil output) S1 *60-80/70-90°C | 23/30 kW |
| Maximum quantity of drawn off water MIX 45°C (**15-60°C), Power input cut off (S1) | 225 L |
| Heat exchanger capacity S1 | 4.6 L |
| Rated pressure of the heat exchanger | 6 bar |
| Insulation (rigid PU) | 50 mm |
| Minimum time of heating S1 *80°C-**15/60°C | 39 |
| Maximum quantity of drawn off water MIX 45°C (**15-60°C), Power input cut off (S2) | 111 L |
| Heat exchanger surface S1 | 0.75 m² |
| Heat exchanger surface S2 | 0.54 |
| Height | 1200 mm |
| Minimum height of the premise | 1345 mm |