"All in one" heat pump and storage tank for domestic hot water production with a heat exchangers
EVHP 9S 200 60
| Maximum working pressure | 8 bar |
| Energy class | А+ |
| Diameter | 600 mm |
| HP thermal power yield | 1.6 kW |
| Capacity | 200 L |
| Heating time | 07:16 h:min |
| Declared load profile | L |
| Electric heating element power | 1.5 kW |
| HP maximum absorption | 0.5 kW |
| Min. ÷ max temperature heat pump air intake (90% R.H.) | 4÷43 °C |
| Frequency | 50 Hz |
| Annual electricity consumption in kWh under average climate conditions | 929 kWh |
| Power supply | 1/N/230 V |
| Compressor | Rotary |
| Min. ÷ max temperature installation site | 4÷43 °C |
| Compressor protection | Thermal circuit breaker with automatic reset |
| Average consumption | 0.37 kW |
| Maximum current in HP | 2.3 A |
| Thermodynamic circuit protection type | Safety pressure switch with automatic reset |
| Fan | Centrifugal |
| HP Maximum settable temperature | 56 °C |
| Internal protection | Single safety thermostat with manual reset on a resistive element |
| Nominal air capacity | 350 m³/h |
| Max. pressure head available | 100 Pa |
| Motor protection | Internal thermal circuit breaker with automatic reset |
| Condenser | Wrapped externally not in contact with water |
| Coil for connection to solar thermal power system | 0.96 m² |
| Coil for connection to an auxiliary heating source | N/A m² |
| Transport weight | 94 kg |
| Sound power Lw (A) | 59 dB(A) |
| Automatic anti-Legionnella disinfection cycle | YES |
| Height | 1714 mm |
| Minimum height of the premise | 1751 mm |
* Required fields