TESY AquaThermica Pro is a floor standing air-to-water heat pump for domestic hot water engineered for high energy efficiency, smart performance, and eco-conscious operation. Designed for domestic hot water production, it is available in 200L and 260L capacities

Using the natural R290 (propane) refrigerant, AquaThermica Pro achieves -low Global Warming Potential (GWP) and zero Ozone Depletion Potential (ODP). It can heat water up to 65°C using only the heat pump, offering  energy savings versus conventional electric water heaters. Its high Coefficient of Performance (COP)—up to 3.8—makes it one of the most efficient systems in its class.

  • Floor-standing "air-water" heat pump for domestic hot water production.
  • The AquaThermica Pro range includes models with a volume of 200 and 260 liters with and without a heat exchanger
  • Greater energy efficiency and performance are guaranteed by refrigerant R290 / propane/ 
  • Electric heating element for faster heating and reaching a high temperature of 75°C.
  • Automatic "Antilegionella" function and self-diagnosis system
  • Floor standing models
  • Energy class A+
  • Reduced CO2 emissions
  • Electronically regulated expansion valve with stepper motor
  • Temperature range of the incoming air from -7°С to +43°С
  • Reduced electricity consumption
  • Lateral 45° air ducts for installation in rooms as low as 2 meters
  • Quiet operation: just 34 dB(A) at 1 meter
  • DRY CHECK Check the magnesuim anode without draining the water.
  • Electronic Expansion Valve (EEV) for precision refrigerant control
  • Microchannel condenser and dual temperature sensors for performance and efficiency
  • Easy-to-use electronic panel
  • Up to 65°C DHW temperature with operation of only the heat pump unit
  • Connection to solar and photovoltaic panels
  • Easy-to-use electronic panel
TIN Code 306268
Capacity 194 L
Range 194
Height 1.622 m
Energy class A+
Maximum
operational temperature
75 °C
Maximum working pressure 8 bar
Diameter 630 mm
Heating time 7:11 h:min
Declared load profile L
Electric heating element power 1.5 kW
Min. ÷ max temperature heat pump air intake (90% R.H.) -7 ÷ 43 °C
Frequency 50 Hz
Annual electricity consumption in kWh under average climate conditions 679 kWh
Power supply 1/N/220-240 V
Compressor Rotary
Min. ÷ max temperature installation site -4 ÷ 40 °C
Compressor protection Thermal circuit breaker with automatic reset
Maximum current in HP 2.5 + 6.5 (e-heater) = 9 A
Required overload protections 16A T fuse/ 16 A automatic switch characteristic C (to be expected during installation on power supply systems)
Fan Centrifugal
HP Maximum settable temperature 65 °C
Internal protection Single safety thermostat with manual reset on a resistive element
Nominal air capacity 360 m³/h
Motor protection Internal thermal circuit breaker with automatic reset
Condenser Wrapped externally not in contact with water
Transport weight 110.8 kg
Automatic anti-Legionnella disinfection cycle YES
Minimum height of the premise 1785 mm
Defrosting Active with 4-way valve
CoP (DHW) 3.6
Degree of Protection IPX4
Refrigerant R290
Refrigerant charge 150